Industrial Coatings

Neumann Contractors - Industrial Coatings can offer specialised service and expert advice over a wide range of industrial spray painting techniques over a variety of surfaces, at our Currumbin Facility, on the Gold Coast.  Our services include the application of:

We can handle most industrial coatings needs and we have a single site at Currumbin on the Gold Coast for  Steel FabricationAbrasive Blasting as well as Industrial Coatings, so we can provide a complete start to end package.

Call Peter today for a quote for your Industrial Coatings project

Phone : (07) 5589 9303 or (07) 5589 2746  Mobile 0429 468 631

We only use high quality paints and materials from leading suppliers such as:

Quaity Paint Suppliers


Contact Details and Location

Contact: Peter Freeman (Abrasive Blasting & Industrial Coatings - Gold Coast Manager)

Office/Workshop - Davall Street, Currumbin, Gold Coast, Queensland 4223

Correspondence - PO Box 8 Currumbin, Gold Coast, Queensland 4223

Neumann Contractors - Industrial Coatings Facility is located in the Neumann complex in Currumbin, on the Gold Coast, Link to Google Map


Workplace Health & Safety - Industrial Coatings (Spraypainting)

The health and safety of our people is of the highest priority and cannot be compromised. Our objective is to have a workplace free of incidents and injuries.

Neumann Contractors is committed to maintaining a safe and healthy working environment for all our Industrial Coatings employees and others, and the continuous improvement of occupational health and safety in all areas of the Company’s activities.

Neumann Contractors - Industrial Coatings fully complies with:


Australian Standards

Neumann Contractors - Industrial Coatings follows all applicable Australian Standards in all its spray painting and associated activities, including:


Types of Paints Used

Internaitional-Marine Website

International Paints

International - Interthane 990 – Polyurethane

Product Description:
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

Intended Uses:
Suitable for use in both new construction and as a maintenance finish which can be used in a wide variety of environments including offshore structures, chemical and petrochemical plants, bridges, pulp and paper mills, and in the power industry.  

Safety Data Sheet   Product Data Sheet
International - Intergard 251 – Epoxy

Product Description:
A two component epoxy anti-corrosive primer pigmented with zinc phosphate.

Intended Uses:
For use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems for use in the offshore, petrochemical, chemical, pulp and paper and bridge industries.
The fast drying and handling properties, together with extended overcoatability, make this an excellent primer for factory application prior to full system application on site. Intergard 251 provides good abrasion resistance which minimises mechanical damage in transit between the factory and site.

Safety Data Sheet   Product Data Sheet
International – Interfine 979 – Acrylic Polysiloxane

Production Description:
A patented (US 6,281,321 and EP 0 941290), high performance, two component, high solids inorganic hybrid finish which offers compliance to all current VOC legislation, and contains no free isocyanates.
Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes as well as offering improvement in gloss and colour retention when compared to 1st generation epoxy modified polysiloxane finishes.
Interfine 979 also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.

Intended Uses:
Interfine 979 is part of International's premium range of polysiloxane finishes. It is designed to provide excellent long-term colour and gloss retention and provide extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system. Interfine 979 is intended for use in those market sectors where visual impact is important, and the need for a high standard of cosmetic appearance is required. These include high performance constructions such as bridges, offshore structures and tank farms in addition to general industrial and commercial steelwork where high levels of cosmetic performance are a key requirement.
The dual benefits of corrosion protection & high cosmetic appearance afforded by Interfine 979 mean that as well as exhibiting superior durability, this product also serves as an effective barrier coat similar to a traditional epoxy intermediate, and as such, allows a reduction in the total number of coats required from a multi-coat high performance system - saving application costs, and improving productivity during application.

Safety Data Sheet   Product Data Sheet
International – Interplus 1180 – Epoxy

Product Description:
A low VOC, high build, high solids two component multi purpose epoxy coating.

Intended Uses:
A high perfomance surface tolerant primer finish or intermediate coat with outstanding water, chemical and solvent resistance. Interplus 1180 has fast cure at room temperature and outstanding cure at low temperatures. 

Safety Data Sheet   Product Data Sheet
International – Interzinc 2280 – Inorganic Zinc Rich Silicate

Product Description:
Part of the Interzinc 22 series of products.

Intended Uses:
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 2 requirements. Available in ASTM D520, Type II zinc dust version as standard.

Safety Data Sheet   Product Data Sheet
International – Interzone 954 – Modified Epoxy

Product Description:
A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

Intended Uses:
Primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. Interzone 954 has also found extensive use in a number of other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates.
As part of a non-slip deck system in conjunction with appropriate aggregate. 

Safety Data Sheet   Product Data Sheet
International - Intertherm 50 – High Temperature Silicone

Product Description:
A single component, high temperature coating, based on a moisture curing silicone binder.
The moisture curing crosslinking mechanism allows multiple coats to be applied without heat curing. Suitable for temperatures up to 540°C (1004°F).

Intended Uses:For the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, at temperatures up to 540°C (1004°F).  Where maximum corrosion protection is required, application should be over a zinc silicate primer (e.g. Interzinc 22).

Safety Data Sheet   Product Data Sheet

Jotun - Australia Website

Jotun - Paints and Coatings

Jotun - Jotunprime 250 - Air Dried Primer

Product Description:
Jotaprime 250 is a high build air drying primer with enhanced zinc phosphate pigments. Jotaprime 250 does not contain chromates.

Recommended Use:
An anti-corrosive primer for ferrous metals where limited surface preparation is used. Temperature resistance up to 95ºC. 

Safety Data Sheet   Technical Data Sheet
Jotun - Barrier - Polyamide Cured Epoxy

Product Description:
This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms to the compositional requirements of SSPC paint 20, level 2. It provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric environments. Suitable for
carbon steel, repair of inorganic zinc silicate coating and damaged galvanised steel substrates. This product complies with ASTM D520 type II zinc dust.

Recommended Use:
An anti-corrosive primer for ferrous metals where limited surface preparation is used. Temperature resistance up to 95ºC.

Safety Data Sheet Technical Data Sheet
Jotun – Jotaprime – Polyamide Cured Epoxy

Product Description:
This is a two component polyamide cured epoxy coating. It is a fast drying, abrasion resistant, high solids, high build product. Can be used as an all year newbuilding and repair coating. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates. It can be applied at sub zero surface temperatures.

Intended Uses:
Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Specially designed as a primer in coating systems where extended durability is required.

Safety Data Sheet   Technical Data Sheet
Jotun – Penguard HB – Epoxy

Product Description:
Penguard HB is a high build, two-pack epoxy coating based on epoxy resin with high molecular weight. This product is a part of a complete system which is certified not to spread surface flames.

Intended Uses:
As an anti corrosive primer and intermediate coating for corrosion protection of various substrates including steel. May be used in tanks for potable water. A suitable washing procedure depending on national rules may be required. 

Safety Data Sheet   Technical Data Sheet
Jotun – Tank Guard 412 – Solvent Free Polyamide Cured Epoxy

Product Description:
Tankguard 412 is a solvent-free, two-pack epoxy tank coating.

Intended Uses:
Tankguard 412 is designed for use in Potable Water (drinking water) tanks. Tankguard 412 can also be used for corrosion protection for the internal lining of steel storage tanks and for friction reduction in gas pipes - please contact Jotun for specific recommendations.

Safety Data Sheet   Technical Data Sheet
Jotun – Jotamastic 90 – Polyamine Cured Epoxy Mastic

Product Description:
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high solids, high build product. This product is tintable in a wide range of colours in Jotun's Multicolor Industry (MCI) system. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel, aluminium, concrete and a range of aged coating surfaces. It can be applied at sub zero surface temperatures.

Intended Uses:
General: Primarily designed for maintenance and repair.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

Safety Data Sheet     Technical Data Sheet
Jotun – Hardtop – Polyurethane

Product Description:
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with excellent gloss retention. It has good chemical resistance. To be used as topcoat in atmospheric environments.

Intended Uses:
Marine: Recommended for topside, deck and superstructure.
Protective: Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.

Safety Data Sheet     Technical Data Sheet
Jotun – SeaGuardian – Anti-Fouling

Product Description:
Antifouling SeaGuardian is a tin free selfpolishing antifouling. IMO Anti-fouling System Convention compliant (AFS/CONF/26).

Intended Uses:
As an antifouling on vessels operating in global service, with drydocking intervals up to 36 months. 

Safety Data Sheet     Technical Data Sheet

Wattyl - Industrial Coatings Website

Wattyl Industrial Coatings

Wattyl – Epinamel PR250 – Epoxy Primer
Product Description:
  • a universal two pack adhesion promoting, polyamide cured epoxy primer,
  • approved to APAS-2971,
  • conforms to AS/NZS 3750.13 Type 2 and 3,
  • FDA Food Contact Compliant.
Principal Characteristics:
  • general purpose epoxy primer in protective coating systems
    for steel and non-ferrous metals
  • excellent adhesion to steel, galvanized steel, non-ferrous
    metals and fibreglass
  • excellent flow and wetting properties
  • excellent water and corrosion resistance
  • cures at temperatures down to +5°C
  • suitable for touching up of weld seams and damages of
    epoxy coatings during construction
  • long recoating intervals are possible when overcoating with
    epoxy and polyurethane coatings
  • can be overcoated with most alkyd, chlorinated rubber,
    epoxy, two component polyurethane and catalysed acrylic
    coatings
  • suitable on wet blast cleaned substrates (damp or dry)
  • suitable primer for immersion systems (in fresh and salt
    water) when applied over suitably prepared surfaces
  • suitable with well designed cathodic protection systems
  • suitable for use as a prefabrication primer (Olive Green
    only) (refer to Technical Data Sheet P30.07 for details)
  • cure with Epinamel EH100 standard hardener or Epinamel EH120 low temperature hardener

Safety Data Sheet   Technical Data Sheet

Wattyl – Duranamel PR9 – Alkyd Zinc Phosphate Primer
Product Description:
  • a single pack fast air drying, high build modified alkyd zinc phosphate primer

Principal Characteristics:

  • provides cathodic protection to steel,
  • excellent corrosion resistance,
  • quick drying,
  • high build achievable in one coat application,
  • excellent adhesion to suitably prepared steel surfaces,
  • suitable for top coating with Wattyl Industrial Enamels for both new and maintenance work,
  • may be overcoated with selected coloured two-pack products including Poly U400, Poly U750, Colourthane CSeries and Paracryl IF540 when applied direct to mild steel

Safety Data Sheet   Technical Data Sheet


Wattyl – Galvit EP102 –Zinc Epoxy Primer
Product Description:
  • a two pack polyamide-cured zinc rich rapid recoat epoxy primer,
  • zinc in dry film 65%
Principal Characteristics:
  • provides cathodic protection to steel
  • designed as a system primer for various paint systems
  • rapid recoat technology is designed for fast recoating at low temperatures
  • excellent corrosion prevention properties
  • can serve as a holding primer for various maintenance systems
  • the topcoating paint system must be non-saponifiable

Safety Data Sheet   Technical Data Sheet


Wattyl – Epinamel DTM985 – Epoxy
Product Description:
  • a two component surface tolerant high solids, direct to metal high build polyamine adduct cured epoxy coating,
  • approved to APAS 2973,
  • conforms to AS/NZS 3750.14,
  • conforms to AS/NZS 4020:2005 factory made white only
Principal Characteristics:
  • maintenance coating for use in a wide range of industrial applications as a primer, build coat or finish coat
  • tolerant to lower grades of steel preparation for atmospheric exposure
  • excellent recoatability
  • cures down to 0°C with Low Temperature (LT) Part B
  • excellent abrasion resistance
  • resistant to splash of alkali, mineral oils, solvents and dilute acids
  • suitable for immersion in salt and fresh water
  • suitable for sewerage immersion applications such as wet wells and storage tanks (both for steel and concrete substrates)
  • can be applied to existing piling between tides or for new work
  • can be exposed to water immersion shortly after application
  • suitable with well-designed cathodic protection systems

Safety Data Sheet     Technical Data Sheet


Wattyl – Poly U400 – Polyureathane
Product Description:
  • a two pack recoatable isocyanate cured, acrylic polyurethane finish,
  • approved to APAS-1441/2, APAS-2911/1,
  • conforms to AS/NZS 3750.6 Type 1.
Principal Characteristics:
  • unlimited recoatability
  • excellent resistance to atmospheric exposure
  • excellent gloss retention
  • tough, flexible and abrasion resistant
  • resistant to splash of mineral oils, vegetable oils and aliphatic petroleum products
  • resistant to splash of mild chemicals

Safety Data Sheet   Technical Data Sheet


Wattyl – Agricultural Enamel – Alkyd Gloss Enamel
Product Description:
  • a premium quality acrylic modified alkyd gloss enamel
Principal Characteristics:
  • excellent exterior durability
  • excellent flow and application properties
  • very high gloss off-the-gun
  • hard wearing
  • may be readily touched-up or recoated after overnight drying
  • long open time, offers good overspray absorption for spraying large items
  • designed for use on cranes, harvesters, tractors, truck bodies

Safety Data Sheet   Technical Data Sheet